O le filifilia o le resini palasitika sa'o mo lau galuega fa'aulu e mafai ona avea ma lu'itau.Tau, mamafa, fetuutuunai, malosi, ma sili atu mea uma i totonu ole resin e sili ona lelei mo lau vaega.
Ole fa'atomuaga lea ile uiga, fa'amanuiaga, ma fa'aletonu ile resini e masani ona fa'aogaina ile fa'a'ai.
Polyethylene High Density (HDPE)
O le HDPE o le palasitika #1 a le lalolagi ma le mea e masani ona feulaina i mea palasitika.O lo'o fa'aogaina i le tele o oloa, e aofia ai fagu mo vai fa'atau e pei o le shampoo ma le suau'u afi, mea fa'alili, fale ta'alo, tane suau'u, pa'u fale gaosi oloa, ma atigi pusa.E fa'alelei-faauo, fa'afefeteina ma faigofie ona lanu, ma fa'ama'i fa'ama'i (fa'amaonia FDA ma atonu o le sili ona saogalemu o palasitika uma).PE ole resin e masani ona toe fa'aaogaina ma le fa'ailoga fa'ailoga 2.
Fa'atusatusaga fa'atusa lautele
| Tau | $0.70/pa. | Malosi | 0.95 g/cc |
| Maulalo Temp | -75°F | Su'ega vevela maualuga | 160°F |
| Flex Modulus | 1,170 mpa | Malosi | matafaga 65D |
Polyethylene Ma'a'a maualalo (LDPE)
O fesuiaiga o le LDPE e aofia ai le laina-maualalo (LLDPE) ma faʻatasi ma le ethyl-vinyl-acetate (LDPE-EVA).O le LDPE e fa'aogaina mo oloa vaivai e mana'omia ai se maualuga maualuga o le fa'alavelave fa'afefe po'o le fetuutuunai.E masani lava, o le maualuga o le ethyl-vinyl-acetate (EVA) anotusi, o le sili atu ona vaivai le vaega faʻapipiʻi.O fa'aoga masani e aofia ai fagu oomi, auala fa'alava, ma fender va'a.Ole fa'aoga maualuga ole ata feula mo taga palasitika.E fa'alelei fo'i, e fa'afefeteina ma faigofie ona lanu, e le fa'aaogaina, ma e masani ona toe fa'aaogaina i lalo ole code 4.
Fa'atusatusaga fa'atusa lautele
| Tau | $0.85/pa. | Malosi | 0.92 g/cc |
| Maulalo Temp | -80°F | Su'ega vevela maualuga | 140°F |
| Flex Modulus | 275 mpa | Malosi | matafaga 55D |
Polypropylene (PP)
O le PP o le palasitika #2 a le lalolagi - o se resini lalaga tui e sili ona lauiloa.O le PP e tutusa ma le HDPE, ae laʻititi laʻititi ma maualalo le mamafa, lea e maua ai ni faʻamanuiaga.O le PP e masani ona faʻaaogaina i faʻaoga maualuga o le vevela, e pei o faʻamalama ipu ma vaega faʻafomaʻi e manaʻomia ai le faʻamaʻaina o le autoclave.E fa'alelei fa'alelei fa'apea fo'i e felanulanua'i ma faigofie ona lanu.O nisi fa'amatalaga fa'amanino e maua ai le "fa'amanino feso'ota'iga."O le toe fa'aaogaina o le PP e taatele i lalo ole code 5.
Fa'atusatusaga fa'atusa lautele
| Tau | $0.75/pa. | Malosi | 0.90 g/cc |
| Maulalo Temp | 0°F | Su'ega vevela maualuga | 170°F |
| Flex Modulus | 1,030 mpa | Malosi | matafaga 75D |
Polyvinyl Chloride (PVC)
E ui lava o le PVC o le palasitika #3 a le lalolagi, ua matua suʻesuʻeina mo le faʻaaogaina o le cadmium ma le taʻitaʻi e fai ma faʻamautu, faʻasaʻolotoina o le hydrochloric (HCl) acids i le taimi o le gaosiga, ma faʻasaʻolotoina o totoe vinyl chloride monomers pe a maeʻa le faʻaogaina (o le tele o nei faʻafitauli ua faʻaitiitia).O le PVC e feliuliua'i ma e sau i foliga malo ma vaivai - o le resini vaivai e masani ona fa'aoga i le feula.O fa'aoga masani e aofia ai vaega vaivai fa'afoma'i, fa'alava, ma fa'a'au fa'alava.O meafaigaluega fa'apitoa e fa'agaoio ai e fautuaina e puipuia ai le pala mai le HCl.O le PVC e mafai ona toe faʻaaogaina i lalo ole code 3.
Fa'atusatusaga fa'atusa lautele
| Tau | $1.15/pa. | Malosi | 1.30 g/cc |
| Maulalo Temp | -20°F | Su'ega vevela maualuga | 175°F |
| Flex Modulus | 2,300 mpa | Malosi | matafaga 50D |
Polyethylene Terephthalate (PET)
PET o se polyester lea e masani ona tui tui e faʻapipiʻiina i totonu o pusa manino.E ui lava e le mafai ona faʻafefeina le PET, e le masani ai, aua e manaʻomia e le resini le faʻamago tele.Ole maketi sili ona tele ole PET blow molding e mo vai inu ma fagu vai.O lo'o fa'atupula'ia fua fa'atatau ole toe fa'aaogāina ole PET i lalo ole fa'ailoga 1.
Fa'atusatusaga fa'atusa lautele
| Tau | $0.85/pa. | Malosi | 1.30 g/cc |
| Maulalo Temp | -40°F | Su'ega vevela maualuga | 160°F |
| Flex Modulus | 3,400 mpa | Malosi | matafaga 80D |
Elastomers fa'amama (TPE)
O TPE e fa'aoga e sui ai le pa'u fa'anatura i vaega ua liu.O mea o lo'o fa'aogaina e le opa ma e mafai ona valivali (e masani ona uliuli).O TPE e masani ona fa'aogaina i ufi fa'amalolo o ta'avale ma alavai e fa'aulu ai le ea, fa'amau, ma luga o le u'u.E fa'alelei lelei pe a uma ona fa'agogo ma masani ona toe fa'agasolo lelei.Ae ui i lea, o fua faatatau toe fa'aaogaina e fai si fa'atapula'a i lalo ole code 7 (isi palasitika).
Fa'atusatusaga fa'atusa lautele
| Tau | $2.25/pa. | Malosi | 0.95 g/cc |
| Maulalo Temp | -18°F | Su'ega vevela maualuga | 185°F |
| Flex Modulus | 2,400 mpa | Malosi | matafaga 50D |
Acrylonitrile Butadiene Styrene (ABS)
O le ABS o se palasitika faigata, faʻaaogaina e tui ai pulou soka.Blow molding grade ABS e masani lava opaque ma lanu mo le faaaogaina i fale faaeletonika ma meafaigaluega laiti.E fa'alelei lelei le ABS pe a uma ona fa'agogo.Peita'i, o vaega e fai mai le ABS e le'o fa'ama'i fa'ama'i e pei o le PE po'o le PP, o lea e tatau ona fa'aoga fa'aeteete i vaega e fa'afeso'ota'i ma vaila'au.O togi eseese e mafai ona pasia le Tulaga mo le Saogalemu o Mea Fa'apalapala mo Vaega i Su'ega ma Mea Fa'aoga (UL 94), Fa'avasega V-0.O le ABS e toe fa'aaogaina e pei o le code 7, ae o lona malosi e faigata ai le olo.
Fa'atusatusaga fa'atusa lautele
| Tau | $1.55/pa. | Malosi | 1.20 g/cc |
| Maulalo Temp | -40°F | Su'ega vevela maualuga | 190°F |
| Flex Modulus | 2,680 mpa | Malosi | matafaga 85D |
Polyphenylene Oxide (PPO)
O le PPO o se resini fa'amalama.E mana'omia le fa'agogo ma e fa'atapula'aina le toso i lalo i le taimi e fa'asolo ai.O lenei mea e faʻatapulaʻaina ai tagata mamanu i vaega PPO faʻatasi ai ma fua faʻafefe poʻo foliga mafolafola, e pei o panels ma desktops.O vaega ua liuina e malo ma fai si malosi.E pei ole ABS, PPO togi e mafai ona pasia UL 94 V-0 ta'iala e mu.E mafai ona toe gaosia, ma ua talia e nai tagata toe fa'aaogaina i lalo ole code 7.
Fa'atusatusaga fa'atusa lautele
| Tau | $3.50/pa. | Malosi | 1.10 g/cc |
| Maulalo Temp | -40°F | Su'ega vevela maualuga | 250°F |
| Flex Modulus | 2,550 mpa | Malosi | matafaga 83D |
Nilon/Polyamides (PA)
E vave ona liusuavai le nailoni, o lea e masani ona faʻaaogaina i le tui tui.O resini o lo'o fa'aaogaina mo le fa'aosoina o le fa'aulu e masani lava ona eseese o naillon 6, nylon 4-6, nylon 6-6, ma nylon 11.
O le Nylon o se mea e fa'afefeteina le tau talafeagai ma e lelei le tete'e o vaila'au ma fa'atino lelei i siosiomaga vevela maualuga.E masani ona fa'aoga e fai ai paipa ma faatanoa i totonu o vaega afi afi.E tasi le vasega fa'apitoa, nylon 46, e mafai ona fa'aauau le vevela e o'o atu i le 446°F.O nisi togi e ausia le UL 94 V-2 ta'iala mo le mu.E mafai ona toe gaosia le nailo, i nisi tulaga, i lalo ole tulafono toe fa'aaogaina 7.
Fa'atusatusaga fa'atusa lautele
| Tau | $3.20/pa. | Malosi | 1.13 g/cc |
| Maulalo Temp | -40°F | Su'ega vevela maualuga | 336°F |
| Flex Modulus | 2,900 mpa | Malosi | matafaga 77D |
Polycarbonate (PC)
O le malosi o lenei mea manino, o mea faigaluega solofanua ua fa'aatoatoaina mo oloa e amata mai matatioata i matatioata e fa'apolopolo i totonu o vaalele vaalele.E masani fo'i ona fa'aoga e fai ai fagu vai 5-kalone.E tatau ona fa'amago PC a'o le'i fa'againa.E fa'alelei lelei i foliga fa'avae, ae mana'omia se su'esu'ega ogaoga mo foliga lavelave.E faigata tele fo'i ona olo, ae toe fa'asolo i lalo ole code recycle 7.
Fa'atusatusaga fa'atusa lautele
| Tau | $2.00/pa. | Malosi | 1.20 g/cc |
| Maulalo Temp | -40°F | Su'ega vevela maualuga | 290°F |
| Flex Modulus | 2,350 mpa | Malosi | matafaga 82D |
Polyester & Co-poliester
O le polyester e masani ona faʻaaogaina i le fiber.E le pei o le PET, o polyesters ua suia e pei o le PETG (G = glycol) ma le co-polyester o loʻo faʻamalamalamaina mea e mafai ona faʻafefeteina.Co-polyester o nisi taimi e faʻaaogaina e suitulaga i le polycarbonate (PC) i totonu o pusa oloa.E talitutusa ma le PC, ae e le o manino pe faigata ma e le o iai le bisphenol A (BPA), o se vailaʻau e faʻatupu ai popolega ile soifua maloloina i nisi o suʻesuʻega.Co-polyesters o loʻo faʻaalia le faʻaleagaina o mea teuteu pe a uma ona toe gaosia, o mea faʻaaogaina ua fai si faʻatapulaʻaina maketi i lalo ole code 7.
Fa'atusatusaga fa'atusa lautele
| Tau | $2.50/pa. | Malosi | 1.20 g/cc |
| Maulalo Temp | -40°F | Su'ega vevela maualuga | 160°F |
| Flex Modulus | 2,350 mpa | Malosi | matafaga 82D |
Urethane & Polyurethane
Urethanes e maua ai mea fa'atino e ta'uta'ua i pa'u pei o vali.O Urethanes e masani lava ona sili atu le malosi nai lo polyurethanes, lea e tatau ona faʻapipiʻi faʻapitoa e avea ma urethanes thermoplastic.O togi vevela e mafai ona lafo ma faʻapipiʻi pe faʻafefe tui.O mea e masani ona faʻaaogaina e pei o le tasi laulau i le tele-layer blow molding.Ionomer versions e mafai ona faʻaaogaina e faʻaalia ai le susulu.O le toe fa'aaogaina e masani lava ona fa'atapula'a i le toe gaosia i totonu o le fale i lalo ole tulafono 7.
Fa'atusatusaga fa'atusa lautele
| Tau | $2.70/pa. | Malosi | 0.95 g/cc |
| Maulalo Temp | -50°F | Su'ega vevela maualuga | 150°F |
| Flex Modulus | 380 mpa | Malosi | Matafaga 60A – 80D |
Acrylic & Polystyrene
O le manino o nei resini tau maualalo e taʻitaʻia ai tagata faʻatau e talosagaina i latou mo talosaga e pei o tioata moli.O mea e masani ona fa'afefe i le taimi e fa'aosoina ai ma e foliga mai e liusuavai i se tulaga vai, lea e fa'aitiitia ai le fua o le manuia i le fa'aosoina.O lo'o fa'aauau pea ona galulue le au gaosi ma le fa'aputuga i le fa'agaioiina o fa'alelei mo togi fa'ama'i ma sina manuia.O mea e mafai ona toe faʻaaogaina, masani mo le faʻaogaina i le tui tui, i lalo ole code 6.
Fa'atusatusaga fa'atusa lautele
| Tau | $1.10/pa. | Malosi | 1.00 g/cc |
| Maulalo Temp | -30°F | Su'ega vevela maualuga | 200°F |
| Flex Modulus | 2,206 mpa | Malosi | matafaga 85D |
Mea Fou
O tagata gaosi ma mea fa'apipi'i e tu'uina atu se fa'avasegaga mata'ina o mea fa'alelei fa'alelei.E tele mea e fa'alauiloa mai i aso uma e iai le tele o mea totino.Mo se faʻataʻitaʻiga, TPC-ET, o le thermoplastic elastomer o le co-polyester, o loʻo suitulaga TPE masani i tulaga maualuga o le vevela.Fou TPU thermoplastic urethane elastomers e tetee atu i suauu, ofuina, ma loimata e sili atu nai lo TPE masani.E te mana'omia se tagata fa'atau oloa e su'esu'e atina'e i totonu o le pisinisi palasitika.
Fa'atusatusaga fa'avasegaga fa'atatau ile ituaiga palasitika
| Tau | Malosi | Maulalo Temp | Maualuluga Temp | Flex Modulus | ShoreHardness | Toe fa'aaogaina Code | |
| HDPE | $0.70/pa | 0.95 g/cc | -75°F | 160°F | 1,170 mpa | 65D | 2 |
| LDPE | $0.85/pa | 0.92 g/cc | -80°F | 140°F | 275 mpa | 55D | 4 |
| PP | $0.75/pa | 0.90 g/cc | 0°F | 170°F | 1,030 mpa | 75D | 5 |
| PVC | $1.15/pa | 1.30 g/cc | -20°F | 175°F | 2,300 mpa | 50D | 3 |
| PET | $0.85/pa | 1.30 g/cc | -40°F | 160°F | 3,400 mpa | 80D | 1 |
| TPE | $2.25/pa | 0.95 g/cc | -18°F | 185°F | 2400 mpa | 50D | 7 |
| ABS | $1.55/pa | 1.20 g/cc | -40°F | 190°F | 2,680 mpa | 85D | 7 |
| PPO | $3.50/pa | 1.10 g/cc | -40°F | 250°F | 2,550 mpa | 83D | 7 |
| PA | $3.20/pa | 1.13 g/cc | -40°F | 336°F | 2,900 mpa | 77D | 7 |
| PC | $2.00/pa | 1.20 g/cc | -40°F | 290°F | 2,350 mpa | 82D | 7 |
| Polyester & Co-poliester | $2.50/pa | 1.20 g/cc | -40°F | 160°F | 2,350 mpa | 82D | 7 |
| Urethane Polyurethane | $2.70/pa | 0.95 g/cc | -50°F | 150°F | 380 mpa | 60A-80D | 7 |
| Acrylic -Styrene | $1.10/pa | 1.00 g/cc | -30°F | 200°F | 2,206 mpa | 85D | 6 |
O avanoa mo mea fou i meafaitino e le gata.Custom-Pak o le a taumafai i taimi uma e faʻaauau pea ona faʻalogo i atinaʻe lata mai ma tuʻuina atu fautuaga sili mo le filifilia o mea e faʻamanuiaina ai lau poloketi.
Matou te faʻamoemoe e fesoasoani lenei faʻamatalaga lautele i mea palasitika.Fa'amolemole Manatua: O togi fa'apitoa o nei meafaitino o le ai ai ni meatotino e matua'i ese lava nai lo le tu'uina atu iinei.Matou te fautuaina malosi e te maua se pepa faʻamatalaga o mea totino e faʻatatau i le resin o loʻo e suʻesuʻeina ina ia e faʻamaonia le tau saʻo o suʻega mo meatotino uma.
O mea palasitika o loʻo faʻatau atu i se maketi malosi.E fesuisuia'i soo tau mo le tele o mafuaaga.O fa'asalalauga tau o lo'o tu'uina atu e le'o fa'amoemoe e fa'aoga mo fa'atauga o oloa.
Taimi meli: Apr-07-2022